BPCL

Exploring Opportunities Towards Success

 

Bharat Petroleum Corporation Limited (BPCL), a Maharatna company, is a public sector unit under the Ministry of Petroleum & Natural Gas, Govt. of India. Also, BPCL is a Fortune 500 company which has also claimed its rightful place in the Forbes 2000 listing.
 

We have a network of 24 marketing laboratories spread across India. All these testing laboratories are equipped with the state-of-the-art test facilities armed with most modern equipment for calibration, testing, and validation. We are pioneers in India to obtain NABL accreditation for our Sewree facility in Mumbai as a 'Proficiency Test Provider' for petroleum products. Recently, we have started producing ‘Reference Material’ for petroleum products at this facility. The reference materials are produced as per ISO:17034:2016. We have been accredited as the first Reference Material Producer (RMP) in the country as per ISO:17034:2016 by NABL (National Accreditation Board for Testing and Calibration Laboratories), a Constituent Board of Quality Council of India, an autonomous body under the Department of Industrial Policy and Promotion, Govt. of India.
 

BPCL RMP is a part of BPCL QA Lab, Sewree, Mumbai. The sophisticated lab is NABL-accredited as per ISO 17025:2005 and is involved in testing and validating petroleum products. All three set-ups, consisting of Testing Laboratory, Proficiency Test Provider and Reference Material Producer, are located under one single roof, which enhances the synergy of operation. This not only increases efficiency, but also helps in quicker turnaround of testing and results.
 

For further information, or if you need any assistance, please get in touch with us at the following contact details.
 

Email: sistlarr@bharatpetroleum.in / siddhartham@bharatpetroleum.in Tel: 022-24176376 / 9871361916  

Image

What is a Reference Material?

A Reference Material (RM) is a sufficiently homogeneous and stable material with respect to a measurement process. Reference Materials are used for one or more of the following:

  • to demonstrate the accuracy of results
  • to calibrate equipment (Only CRM’s shall be used)
  • to monitor laboratory performance
  • to validate methods
  • to enable comparison of methods
  • to demonstrate quality of culture media
  • to demonstrate consistent performance of kits
Image

Why go for BPCL RMs(Reference Materials)/CRMs(Certified Reference Materials)

Customers using RM/CRM of BPCL can avail of the following key benefits:

  • These materials are certified in accordance with ISO:17034:2016
  • CRMs are traceable to national/international standards
  • Affordable pricing
  • Hassle-free procurement
  • Available from a ready stock for immediate dispatch
  • Supplied in tamper-proof security packs
  • All data generated exclusively by 17025 NABL accredited labs
  • Optimum pack size based on test parameters

BPCL RMP is producing the following Reference Materials / Certified Reference Materials as per ISO:17034:2016

High-Speed Diesel (CRM), certified for the following properties.

  • Density at 15 °Celsius by P:16 of IS 1448 / ASTM D 1298
  • K.V at 40 °C by P:25 of IS 1448 / ASTM D 445 / ASTM D 7042
  • PMCC Flash Point by ASTM D:93/P:21 of IS 1448 / IP 170
  • Sulphur by ASTM D 4294/ISO 20847 / ASTM D 3120

Lubricant (CRM), certified for the following properties.

  • Density at 29.5 °C by P:16 of IS 1448 / ASTM D 1298
  • K.V at 40 °C/100 °C by P:25 of IS 1448, ASTM D 445 / ASTM D 7042
  • COC Flash Point by P:69 of IS 1448 / ASTM D 92
  • Pour Point by P:10 of IS 1448 / ASTM D 97

Aviation Turbine Fuel (CRM), certified for the following properties.

  • Density at 15 °C by P:16 of IS 1448 / ASTM D 1298
  • K.V at -20 °C by P:25 of IS 1448 / ASTM D 445 / ASTM D 7042
  • Freezing Point by P:11 of IS 1448 / ASTM D 2386
  • Smoke Point by P:31 of IS 1448 / ISO 3014
  • Colour (Saybolt) P:14 of IS 1448/ASTM D 156

Sulphur in Mineral Oil (CRM), certified for Sulphur W/W
Abel Flash Point (CRM)
Density at 15 °C (CRM)

BPCL RMP has a Memorandum of Understanding with CSIR-NPL (Council of Scientific & Industrial Research–National Physical laboratory of India), India’s national measurement institute – for certifying BPCL Reference Materials as BND (Bharatiya Nirdeshak Dravya), i.e., Indian reference materials.

RMs produced by BPCL under BND has traceability to SI units, which is the highest level of traceability.

What’s more, it supports the ‘Make in India’ initiative of the Govt. of India. Thus, Indian petroleum labs need not depend on foreign reference material producers. This saves cost and time, while also meeting specific requirements under Indian conditions.